+86-028-85255257
80-CH 50G Athermal AWG module in 1U Rackmount
C-Band
L-Band
C+L-Band
Special
50G
100G
200G
Special
16
32
40
48
Special
Gaussian
Broad Gaussian
Flat Top
Module
Rack
Special
0.5m
1m
1.5m
2m
2.5m
3m
Specify
None
FC/APC
FC/PC
SC/APC
SC/PC
LC/APC
LC/PC
ST/UPC
Specify
H58
C59
H59
C60
Special
This document presents the generic specification for the 80-channel 50GHz Athermal AWG MUX/DEMUX Rackmount supplied for use in DWDM system.
Athermal AWG(AAWG) have equivalent performance to standard Thermal AWG(TAWG) but require no electrical power for stabilization. They can be used as direct replacements for Thin Film Filters(Filter type DWDM module) for cases where no power is available, also suitable for outdoor applications over -30 to +70 degree in access networks. F-tone Networks’s Athermal AWG(AAWG) provide excellent optical performance, high reliability, ease of fiber handling and power saving solution in a compact package. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. We can just offer 19” 1U rackmount package for 50G AWG products.
The planar DWDM components(Thermal/Athermal AWG) from F-tone Networks Optronics are fully qualified according to Telcordia reliability assurance requirements for fiber optic and opto-electronic components (GR-1221-CORE/UNC, Generic Reliability Assurance Requirements for Fiber Optic Branching Components, and Telcordia TR-NWT-000468, Reliability Assurance Practices for Opto-electronic Devices).
Features
Low Insertion Loss
Established silica-on-silicon
Low PDL
Low chromatic dispersion
Telcordia GR-1221-CORE qualified
工作溫度:商業(yè)級(jí)0℃~+70℃/工業(yè)級(jí)-40℃~+85℃ 可選
Applications
DWDM transmission
Wavelength Routing
Optical add/drop multiplexing
Parameter | Specification | |||
MIN | Typ | Max | ||
Number of Channels | 80 | |||
Number Channel Spacing(GHz) | 50 | |||
Cha. Center Wavelength(nm) | C-Band | |||
Clear Channel Passband(GHz) | ±6.5 | |||
Wavelength Stability(nm) | ±0.005 | |||
-1 dB Channel Bandwidth(nm) | 0.2 | |||
-3 dB Channel Bandwidth(nm) | 0.3 | |||
Optical Insertion Loss at ITU grid(dB) | 6.0 | 7.0 | ||
Isolation(dB) | Adjacent | 25 | ||
Non-Adjacent | 29 | |||
Total Channel Isolation | 22 | |||
Insertion Loss Uniformity(dB) | 2.0 | |||
Directivity(Mux Only)(dB) | 40 | |||
Insertion Loss Ripple(dB) | 1.5 | |||
Optical Return loss(dB) | 40 | |||
PDL/Polarization Dependent Loss in Clear Channel Band(dB) | 0.3 | 0.5 | ||
Polarization Mode Dispersion(ps) | 0.5 | |||
Maximum Optical Power(mW) | 23 | |||
MUX/DEMUX input/ output Monitoring range(dB/℃) | -35 | +23 | ||
Operating Temperature(℃) | -5 | +25 | +65 | |
Operating Humidity(%RH) | 5 | 95 | ||
Storage Temperature(℃) | -40 | +85 | ||
Storage Humidity(%RH) | 5 | 95 | ||
Package Size(ABS Box)(mm) | L150×W65×H16 | |||
Package Size(1U Rackmount)(mm) | L440×W200×H44 |
1、IL Represents the worst case over a +/-0.01nm window around the ITU wavelength;
2、PDL was measured on average polarization over a +/- 0.01nm window around the ITU wavelength.
{loadmodule mod_custom,Important Notice}